Spiral sand water separator manufacturer's product features

　　1.Adopting shaftless spiral and waterless bearings for easy maintenance;

　　2.Compact structure and light weight;

　　3.The key component of the new transmission device,the reducer,is shaft mounted and does not require a coupling,making it easy to install and align;

　　4.The lining strip is of quick installation type,easy to replace;

　　5.The axial position of the spiral is adjustable,making it easy to adjust the gap between its tail and the box wall;

　　6.The sedimentation device and sand conveying device of the sand water separator are enclosed integrated structures,and have the characteristics of compact structure,light weight,high work reliability,and low maintenance workload.

　　8.Under normal circumstances,the sand water separator matches the performance of the sand pump between the pump type sand settling device and the sand storage room.

　　9.The material of important components such as the shell,bracket,and sand conveyor of the sand water separator is made of stainless steel.The conveying screw in the U-shaped groove is a shaftless screw,and its structural design is to ensure material circulation and no blockage;The shaftless spiral body has sufficient strength and rigidity to ensure that it will not deform or elongate under large working loads.

　　11.The separation tank of the sand water separator is made of stainless steel processing and welding,with a semi-circular bottom,used to support the screw conveyor.The water inlet and overflow pipe are installed at the upper part of the container,and the drainage pipe is installed at the lower part for easy maintenance.All fittings and flanges are made of stainless steel.

　　12.The design of the inlet and outlet pipe diameter of the sand water separator can prevent blockage by impurities in the water.

　　13.The configuration of the sand water sharing machine and its conveying components is suitable for both continuous and intermittent work requirements.

　　14.The U-shaped spiral groove is equipped with a sufficient number of replaceable lining bodies,which have a simple structure and are easy to replace.

　　15.There are no high-speed running parts in the equipment,so the screw wear is low.

　　16.The driving device adopts a shaft mounted reducer,and the output shaft is directly connected to the screw.